Shuntai UL4609 Multi-core Teflon Silicone Jacketed Wire
Technical Specifications
Part Description Shuntai UL4609 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL4609
InsulationFEP (PTFE)
ConstructionMulti-core sheathed wire
ShieldingUnshielded
JacketSilicone rubber jacket
PitchN/A
Core count / AWGCore count and AWG per spec sheet
ColorsPer order

Product Introduction

This multi-core wire uses FEP Teflon insulated cores, with an external silicone sheath, ensuring both core insulation and bundled flexibility. This part number belongs to the Shuntai composite insulated multi-core wire series, used for multi-core connections inside equipment and wiring of electromechanical circuits. The number of cores and layout are confirmed according to the drawings. The UL style number serves only as a structural reference.

Structure and Specifications

This product consists of multiple FEP insulated cores and an outer silicone sheath, with distinct layers of core and sheath materials, making the cable assembly flexible as a whole. The table below lists structural items; the number of cores, conductor specifications, and sheath color should be checked against the specification.

  • UL Style: UL4609 (Structure Reference)
  • Core Insulation: FEP Teflon
  • Sheath Material: Silicone Rubber
  • Structure Type: Multi-core Sheathed Wire
  • Shielding: Unshielded
  • Number of Cores: Confirmed according to drawings and specifications
  • Color: Confirmed according to order

Selection Parameters

When selecting, please provide the circuit list, assembly location, and terminal type. Verify the number of cores, each core’s wire gauge, sheath color, outlet length, and branch location. Terminals or connectors on both ends must correspond to the core layout. Core sequence should be marked in the drawings.

ProjectExplanation
Number of cores and wire gaugeSelected according to the circuit
Sheath and colorConfirmed according to order
Length and branchingProcessed according to drawings
Terminal solutionTerminals/connectors confirmed according to drawings

Application Scenarios

This wire is used for multi-core connections inside electromechanical equipment, bundled wiring inside instruments, and circuits requiring composite insulation; the sheath facilitates organization, bundling, and protection where multiple cores converge.

  • Multi-core wiring inside electromechanical equipment
  • Bundled connection wires for instrumentation equipment
  • Concentrated routing of equipment power and signals
  • Internal lead-out wires for small electromechanical devices

Part Number Composition and Purchase Verification

This page of Shuntai UL4609 Multi-core Teflon Silicone Jacketed Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL4609 Multi-core Teflon Silicone Jacketed Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Prices are quoted based on part number, number of cores, quantity, and delivery time; for substitutes verification, the current part number, drawings, or samples need to be provided. The contact personnel will compare the core insulation, sheath, and terminals before giving recommendations. Confirm the core sequence and appearance of the sample first, then arrange for bulk production; business matters are handled according to the contract.

Related sections and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Section; Shuntai UL4389 Teflon Silicone Multi-core Wire; Shuntai FEP Teflon Multi-core Ribbon Cable.

Get a Quote Back to List