Terminal and wire storage: how to control oxidation, moisture and FIFO
Terminal oxidation: humidity, sulfur and storage time
Plated terminals are sensitive to moisture and sulfur. Long exposure after opening can cause oxidation and higher contact resistance. Seal the remaining quantity after opening, mark the opening date, and do not assume the original package shelf life still applies.
Wire moisture: cartons, pallets and condensation
Cartons and pallets absorb moisture, and warehouses with large temperature swings can form condensation on surfaces. Keep wire off the floor and away from walls, and leave ventilation gaps when storing coils.
FIFO: batch, location and visible labels
Separate the same part number by batch and write part number, batch, date and quantity on the location label. Issue material on a first-in-first-out basis and put opened batches into production first so old material does not sit at the bottom.
Environment control: dehumidification, sealing and desiccant
Keep the warehouse ventilated and dehumidified, and control humidity to the material requirement. For long-term terminal storage, add desiccant and seal the package. Do not wipe terminals or wire with corrosive cleaners.
Checks before production: appearance, crimp trial and isolation
Before production, sample-check terminal appearance, plating and crimp trial. Isolate and label any oxidation, deformation or contamination; do not mix it into normal batches. See custom wire harness manufacturing.