Shuntai UL1007 24AWG PVC Electronic Wire|300V 80℃ Single Core
Technical Specifications
Part Description UL1007 24AWG
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Individual model page
Date —

Dimensions

ItemValue
Gauge24AWG
Construction11/0.16
OD1.40 mm

Product Introduction

This page corresponds to the 24AWG single-core PVC electronic wire in the Shuntai UL1007 series. UL1007 is commonly used for internal low-voltage and signal wiring in electronic and electrical equipment. The conductor is made of a single or stranded bare copper/tinned copper wire, and the insulation is PVC. The 24AWG has a smaller outer diameter compared to 22AWG, making it suitable for internal signal wiring and short-distance power branches in general electronic devices. The actual conductor structure, printing, color, and packaging of the same model from Shuntai are subject to the latest specifications and samples; this page organizes the typical parameters of 24AWG according to the general structure of UL1007, facilitating wire gauge search and inquiry.

Structure and Matching

The wire body consists of an 11/0.16 stranded conductor with a PVC insulation layer. The single-core structure makes it convenient for single wire routing, branching, and terminal processing. The conductor diameter is approximately 0.61mm, the insulation thickness is about 0.38mm, and the finished outer diameter is about 1.40mm. It can be cut, stripped, tinned, or crimped according to downstream processing requirements. Due to the smaller outer diameter compared to 22AWG, it is suitable for internal signal wiring and short-distance power branches in general electronic devices. When selecting, it is necessary to also check the routing space, terminal crimping range, and derating requirements of the complete device. UL1007 is a structural index and does not indicate that Shuntai has obtained a specific certification number; certifications and printed markings should be checked according to specifications and physical products.

Selection Parameters

The table below is organized according to publicly available samples and catalogs. Specific plating, pin position, packaging, and compatible wire gauges should be based on part drawings, specifications, or samples.

ItemParameter/Description
UL StyleUL1007 (Structure Index)
Wire Gauge24AWG
Conductor Structure11/0.16
Conductor Diameter0.61 mm
Insulation Thickness0.38 mm
Finished Outer Diameter1.40 mm
Conductor Resistance94.2 Ω/km (20℃)
Rated Voltage300 V
Rated Temperature80 ℃
Insulation MaterialPVC
Structure TypeSingle-core electronic wire
Reference Cross-section0.221 mm² (≈ 0.22 mm²)

Same Series Part Numbers and Matching

The following part numbers are for reference, matching verification, and quotation communication, and do not represent the full supply range.

Part NumberDescriptionApplication/Use
UL1007 22AWG17/0.16, OD 1.60mmInternal device signal wires
UL1007 24AWG11/0.16, OD 1.40mmShort-distance internal wiring
UL1007 26AWG7/0.16, OD 1.30mmCompact space low-voltage wiring
UL1007 28AWG7/0.127, OD 1.20mmThin wire signal and jumpers
UL1007 20AWG26/0.16, OD 1.80mmHigher current internal wiring
UL1007 18AWG41/0.16, OD 2.10mmPower and higher current internal wires

Application Scenarios

UL1007 24AWG is suitable for low-voltage and signal wiring inside electronic devices, home appliances, and small equipment.

  • Internal connection wires for electronic devices
  • Low-voltage internal wiring for home appliances
  • Internal signal wires for instruments and controllers
  • Wire harness cutting, tin plating, or terminal crimping

Inquiry and Alternatives

For inquiries, please provide the wire gauge 24AWG, conductor structure, color, cut length, terminal treatment, packaging method, and quantity; when replacing, first check the conductor structure, finished outer diameter, insulation material, printing, and terminal scheme. The current carrying capacity must be calculated according to the safety standards of the complete machine, wire harness derating, and temperature rise requirements. No fixed current value is provided on this page.

Related links: Shuntai UL1007 Series Page; Shuntai Wire and Ribbon Cable Categories; Shuntai Wire Agency Section; UL1007 22AWG; 24AWG; 26AWG; 28AWG; Agency Material Number Index.

Get a Quote Back to List