Shuntai UL1007 28AWG PVC Electronic Wire|300V 80℃ Single Core
Product Introduction
This page corresponds to the 28AWG single-core PVC electronic wire in Shuntai's UL1007 series. UL1007 is commonly used for low-voltage and signal wiring inside electronic and electrical equipment. The conductor consists of a single or stranded bare copper/tinned copper, with PVC insulation. The fine 28AWG wire gauge is suitable for low-current signals, jumpers, and high-density internal wiring. The actual conductor structure, printing, color, and packaging of the same Shuntai model should follow the latest datasheet and sample; this page organizes the typical parameters of 28AWG according to the general structure of publicly available UL1007 for convenient wire gauge lookup and quoting.
Structure and Compatibility
The wire consists of a 7/0.127 stranded conductor and a PVC insulation layer. The single-core structure facilitates routing, branching, and terminal processing of individual wires. The conductor diameter is approximately 0.38mm, the insulation thickness approximately 0.38mm, and the finished outer diameter about 1.20mm; it can be cut, stripped, tinned, or crimped according to downstream processes. Since the fine wire gauge is suitable for low-current signals, jumpers, and high-density internal wiring, selection should also check the routing space, terminal crimping range, and overall equipment derating requirements. UL1007 is a structural index and does not imply that Shuntai has obtained a specific certification number; certification and printing information should be verified according to the datasheet and physical product.
Selection Parameters
The following table is organized based on public samples and catalogs. Specific plating, pin positions, packaging, and compatible wire gauges should be based on part drawings, datasheets, or samples.
| Item | Parameter / Description |
|---|---|
| UL Style | UL1007 (Structure Index) |
| Wire Gauge | 28AWG |
| Conductor Structure | 7/0.127 |
| Conductor Diameter | 0.38 mm |
| Insulation Thickness | 0.38 mm |
| Finished Outer Diameter | 1.20 mm |
| Conductor Resistance | 239 Ω/km (20℃) |
| Rated Voltage | 300 V |
| Rated Temperature | 80 ℃ |
| Insulation Material | PVC |
| Structure Type | Single-core Electronics Wire |
| Reference Cross-section | 0.09 mm² (approximately 0.09 mm²) |
Same Series Part Numbers and Matching
The following part numbers are for retrieval, matching verification, and inquiry communication, and do not represent the full supply range.
| Part Number | Description | Application/Use |
|---|---|---|
| UL1007 22AWG | 17/0.16, OD 1.60mm | Internal signal wiring of devices |
| UL1007 24AWG | 11/0.16, OD 1.40mm | Short-distance internal wiring |
| UL1007 26AWG | 7/0.16, OD 1.30mm | Low-voltage wiring in compact spaces |
| UL1007 28AWG | 7/0.127, OD 1.20mm | Fine wire signal and jumpers |
| UL1007 20AWG | 26/0.16, OD 1.80mm | Higher current internal wiring |
| UL1007 18AWG | 41/0.16, OD 2.10mm | Power and higher current internal lines |
Application Scenarios
UL1007 28AWG is suitable for internal low-voltage and signal wiring in electronic devices, home appliances, and small devices.
- Internal connection wires for electronic devices
- Low-voltage wiring inside home appliances
- Internal signal wiring for instruments and controllers
- Wire harness cutting, tinning, or terminal crimping
Inquiry and Alternatives
For inquiries, please provide the wire gauge 28AWG, conductor structure, color, cut length, terminal treatment, packaging method, and quantity; when replacing, first check the conductor structure, finished outer diameter, insulation material, printing, and terminal scheme. The current carrying capacity should be calculated according to the safety regulations of the complete machine, wire harness derating, and temperature rise requirements. No fixed current value is provided on this page.
Related links: Shuntai UL1007 Series Page; Shuntai Wire and Ribbon Cable Categories; Shuntai Wire Agency Section; UL1007 22AWG; 24AWG; 26AWG; 28AWG; Agency Material Number Index.