Shuntai UL1007 26AWG PVC Electronic Wire|300V 80℃ Single Core
Product Introduction
This page corresponds to the 26AWG single-core PVC electronic wire in the Shuntai UL1007 series. UL1007 is commonly used for internal low-voltage and signal wiring in electronic and electrical equipment. The conductor is either a single strand or stranded bare copper/tinned copper, with PVC insulation. The 26AWG wire is thinner, suitable for compact modules, areas around control boards, and wiring in small spaces. The actual conductor structure, printing, color, and packaging of Shuntai’s same model should be based on the latest specification sheets and samples. This page organizes typical parameters of 26AWG according to the general UL1007 structure for easy gauge-based searching and inquiry.
Structure and Matching
The wire consists of a 7/0.16 stranded conductor and PVC insulation layer. The single-core structure facilitates single-wire routing, branching, and terminal processing. The conductor diameter is approximately 0.48mm, insulation thickness approximately 0.38mm, and finished outer diameter about 1.30mm. It can be cut, stripped, tinned, or crimped according to downstream processes. Since the wire is thinner, it is suitable for compact modules, areas around control boards, and wiring in small spaces. When selecting, the wiring space, terminal crimping range, and overall device derating requirements should all be checked. UL1007 is a structural index and does not indicate that Shuntai has obtained a specific certification number; certification and printing content should be verified according to the specification sheet and physical item.
Selection Parameters
The table below is organized according to publicly available samples and catalogs. Specific plating, pin positions, packaging, and compatible gauges should be based on part drawings, specification sheets, or samples.
| Item | Parameter / Description |
|---|---|
| UL Style | UL1007 (Structure Index) |
| Wire Gauge | 26AWG |
| Conductor Structure | 7/0.16 |
| Conductor Diameter | 0.48 mm |
| Insulation Thickness | 0.38 mm |
| Finished Outer Diameter | 1.30 mm |
| Conductor Resistance | 150 Ω/km (20℃) |
| Rated Voltage | 300 V |
| Rated Temperature | 80 ℃ |
| Insulation Material | PVC |
| Structure Type | Single-core Electronics Wire |
| Reference Cross-section | 0.14 mm² (approx. 0.14 mm²) |
Part Numbers of the Same Series and Matching
The following part numbers are for search, matching verification, and inquiry communication, and do not represent the entire supply range.
| Part Number | Description | Application/Use |
|---|---|---|
| UL1007 22AWG | 17/0.16, OD 1.60mm | Internal device signal wires |
| UL1007 24AWG | 11/0.16, OD 1.40mm | Short-distance internal wiring |
| UL1007 26AWG | 7/0.16, OD 1.30mm | Compact space low-voltage wiring |
| UL1007 28AWG | 7/0.127, OD 1.20mm | Thin wire signal and jumpers |
| UL1007 20AWG | 26/0.16, OD 1.80mm | Higher current internal wiring |
| UL1007 18AWG | 41/0.16, OD 2.10mm | Power and higher current internal wires |
Application Scenarios
UL1007 26AWG is suitable for low-voltage and signal wiring inside electronic devices, home appliances, and small equipment.
- Internal connection wires for electronic devices
- Low-voltage internal wiring for home appliances
- Internal signal wires for instruments and controllers
- Wire harness cutting, tin plating, or terminal crimping
Inquiry and Alternatives
For inquiries, please provide the wire gauge 26AWG, conductor structure, color, cut length, terminal treatment, packaging method, and quantity; when replacing, first check the conductor structure, finished outer diameter, insulation material, printing, and terminal scheme. The current carrying capacity should be calculated according to the safety standards of the complete machine, harness derating, and temperature rise requirements. No fixed current value is given on this page.
Related links: Shuntai UL1007 Series Page; Shuntai Wire and Ribbon Wire Categories; Shuntai Wire Agency Section; UL1007 22AWG; 24AWG; 26AWG; 28AWG; Agency Part Number Index.